40mm or 45mm Dellorto DHLA Master Rebuild Kit
Quantity in Basket:
Shipping Weight: 0.10 pounds
The 40mm or 45mm Dellorto DHLA Master Rebuild Kit
(for all SIDE DRAFT Dellortos for this size) includes the hard to find parts
(like the leaky diaphragm) you need to restore lost performance due to
normal wear, fuel corrosion, and deadly varnish build up for
40mm or 45mm Dellortos on your Jensen Healey or any other DHLA
side draft application. Includes all parts required for major
rebuild as shown. The inlet needle seats are 150 (40mm) and 175 (45mm).
An inexpensive Dellorto rebuild every couple of years will prevent
dangerous fuel leaking and fire hazards.
One kit does one carb- if you're running a JH/ Lotus application with
twin carbs, BE SURE TO ORDER 2 KITS FOR YOUR PAIR OF DELLORTOS.
Indicate size needed- 40mm's are the stock Jensen factory non-Federal
spec, while the 45mm's would have been added on later. Other Lotus
applications use 40mm or 45mm, so check if in doubt. This is typically
cast into the carb body just under the top, outside, intake manifold