Stock Jensen Healey Brake Caliper Front Set, Remanufactured, with
Complete & better than new!
Is your Jensen Healey pulling to one side during a hard
brake application? Often, a simple overhaul canít fix this problem. Our
stock brake calipers are remanufactured (not just rebuilt) to the highest
specification possible and will function like new.
We go to great lengths to ensure your calipers are completely restored to
better than new condition. First, the caliper is completely taken apart,
including the caliper halves, and cleaned with a medium that opens the
pores on the castings. The caliper is then degreased with a solvent and
left to air dry. After reassembly with new o-rings and sealant, a space-age
Polymer coating is evenly applied to a completely sterile, pre-warmed
casting, baked at a temperature of 450 degrees Fahrenheit until cured.
Once the coating is applied, the caliper not only looks fantastic, but the
pores of the casting are protected from corrosion and dirt build up,
something paint canít do. Moisture, brake fluid, brake dust, road salt- all
the things that make a caliper look bad canít get to the casting. The caliper
is then reassembled to factory specifications with all brand new pistons and new rubber components. Pins and pad shims are cleaned and cadmium plated.
Why a high-tech Polymer coating and not paint? The Polymer coating is
ultra thin at .005 to .0005. It does not trap heat inside the caliper or
interfere with movement of any of the parts. Powder coating, other
so-called ďcaliper paintĒ and chrome plating are so thick that they
encapsulate the heat in the caliper creating extra heat build up, shortening
the life of all internal parts. Lots of labor involved in the Polymer coating,
and the material is very expensive- but the finished product is exceptional!
Best of all, they work as well as they look. Don't confuse the Jensport
calipers with other inferior, rebuilt calipers that get redone at production
junk brake shops. Each of our sets is finished to perfection in every detail.
Perfect for the highest quality restoration or any Jensen Healey that simply
requires functional brake calipers. New, stock calipers are NLA. The JHPS
stock caliper exchange is the most practical way to get a beautiful and
perfectly functioning, factory original brake caliper set.
factory original, front Brake Caliper Set includes
both front calipers with polymer coating, all new
internal parts (pistons, seals and seal retainers,
anti-squeal shims, brake pad pins and new cotter
pins(does not include brake pads) for the Jensen
Healey & Jensen GT, with core exchange.
Available in black or red. Allow 2-3 weeks for remanufacturing process.
Note: Sold with exchange of your old, complete,
rebuildable caliper cores (you can send complete calipers with
all hardware and pads in place).